|
These are only a few of the items we carry. Contact use if you need any more info on the items you see here.
Always remember that Triple Threat Motorsports are discount buyers. We will use our buying power to find any part for cheaper than most. We only sell the most powerful performance parts. We are breaking the rules by selling the parts that most shop owners/racers keep secret while they sell you the run of the mill stuff. Don't follow the sheep. Plan your work and then work your plan.
|
|
|
600 & 750 intank Fuel pumps
The first step is to add enough fuel. We dont carry the common 255 lph pump but the all new design 600 and 750 3TM intank pumps. They flow enough fuel so you can use your stock lines and rail, but still handle up to 750 hp.
Only 165 bux for the 6OO pump
Only 185 bux for the 75O pump
The 1g or 2g install kit added for no extra cost!!! |
BOLT IN POWER!!!
The name says it all. These are the highest flowing most powerful turbos you can run. Make 400-600 hp with a BOLT IN!!!
Stage 1:
Turn your T25 into a T28 only 699 bux
18G Turbos Bolt in 375 hp
2OG Turbos bolt in 400hp
Only 825 bux for the 18G & 875 for the 20G
Stage 2:
TO4/Mitsu hybred turbo's. These are near bolt in Garrett turbos. They use the Garrett TO4e comp housings with a easy to bolt in 7cm or 8cm "MITSUBISHI" turbine housing. You can get them with new high flow SS oil lines and new coolent lines to boot. Good for 500hp
Only 999 bux.
Stage 3 Frank "7" Full TDO6 25g good for 550-575hp 1300 bux
Full Custom cast TO4 "MONSTER TURBO" Good for a near 700hp
Only 899bux
Options:
Big shaft: Free with any Monster turbo
36O deg thrust bearing: Free on stage 2 and 3 monster turbos
8cm Housings add: 100 bux
Fast Spool: This mod adds 18hp and helps the turbo spool 200rpm quicker and have the power stay on 800 rpm longer
Only 200 bux on any new or used turbo Mitsu or Garrett.
|
|
|
|
High flow turbos
Bolt in a beast go with a 60-1!!!T3/T4
Only 899 |
Trannys!!!
Jap spec swichable VR4 trannys. As you know these trannys live a mild life have low miles on them. Thirty five thousand miles or less is the norm for these units. They can be switched from 2wd to 4wd and are ready to run. Get one starting at 999 with transfer case.
|
|
|
|
Triple Threat Motorsports CNC race rods
If you are looking to make over 450hp you are going to need some stronger rods. We offer CNC aluminum rods for all high powered take no prisoners applications. These rods can hold over 1200hp per set of 4.
Only 600 bux
Allow 2-3 weeks |
Check out the different wheels!!!
I think that this pic gives you a nice idea of the diffrent mitsu wheels. I will soon be posting pics of the garrett wheels. Stay tuned...
|
|
|
|
These are a set of stroker pistons that go into every 2.3 or 2.4 we build.
NOW Only 465 for a set!!! Any bore and comp.
Options:
Only 125 bux To fully coat the pistons top sides & bottom
Only 125 bux to lighten all 4 pistons
Full floaters FREE!!!
Anti detionation groves FREE!!!
Polishing FREE!!!
Allow 2-3 weeks
Our 18G fits and looks like a stock 14B!!! |
|
|
|
|
Gone in 10 seconds
|
|
Triple Threat Motorsports are not just sellers but discount buyers. We hunt for the best prices for the parts you need. Give us the brand and part # and our search will begin. Do you need a EVO drivetrain or Jap spec transmission let us know. Nothing too big or small.
If you know what you want we will find it for less.
All we need is the brand and part#
|
|
